Bed Sensor

Bed Sensor consists of a bed mat and a mBox radio device. The bed sensor is placed under the sheet and connects to the wireless mBox. Chair MatIt is used to monitor the end user bed, for example if they were get up in the middle of the night to use the bathroom and did not returned back to bed within 15 minutes an alarm will automatically be raised to the carephone which will place a call to the alarm receiving centre. It is possible to set different delay times before the alarm is sent, for example 5, 10 or 15 minutes. Time parameters can also be programmed so that the device will only work within certain times of the day for example between 9.00pm and 6.00am.


Technical data

Frequency: 869 MHz
Battery: 2 pcs 1,5v LR06 (AA) Alkaline batteries or 9-30VDC
Power consuption – Battery Operated: 5μA (normal mode) 70 mA (one output activated)
Power consumption – Central Supply 30mA (normal mode) 100 mA (one output activated)
Dimensions: 110.0 x 70.0 x 23.5 mm
Outputs: 2 relay outputs. Max 1A / 30 VDC
Ability to replace batteries: YES
Length of battery life: Up to 2 years

Bed Sensor:
Minimum activation weight: 27 kg
Dimensions: 30″ x 10″
Connector: RJ45